National Service Hotline:
KUN SHAN SOCHI ELECTRONICS CO., LTD
Mobile phone：+86 13335308373
Add：No.88 Qunyi Minying Area, North Hengshan Road, Yushan Town, Kunshan City, Jiangsu Province, China.
Rotor maintenance methods and techniques.
Release time2018-03-26 times browse
General principle for the maintenance of the rotor: Do not use any organic solvent to clean or dry any part of the rotor. Before putting the rotor into the cavity,
General principle for the maintenance of the rotor: Do not use any organic solvent to clean or dry any part of the rotor. Before putting the rotor into the cavity, clean the inside and outside of the rotor with paper or cloth. Any moisture and acid solution will be heated by the microwave. Damage to the rotor components may occur. Especially when moisture and acid solutions are present between the inner and outer tanks, damage may occur more easily. Do not use ice water to cool the tank after heating is stopped to avoid excessive cooling and damage to the outer tank.
Rapid cleaning process 1. Add 8 mL HNO3 to each tank; 2. Run the following procedure: 10 minutes at 180°C; 3. Cool and open the cans; 4. Clean the cans with double distilled water.
Note: When the thickness of the spring piece is less than 7,3 mm, it should be replaced. If you continue to use the spring piece may cause damage to other components.